Calculatorsโ€บTaping & Welding Flow
๐ŸŒŠ

Taping & Welding Flow Calculator

Purge Gas ยท Tape Coating ยท Hot Tap Flow

Flow & Hot Tapping Calculator
Three-in-one calculator for pipeline maintenance: (1) Welding purge gas flow per AWS D10.11, (2) Tape coating requirements per NACE SP0169, and (3) Hot tap branch flow analysis per API RP 2201. Calculates required flow rates, material quantities, and cost estimates.
Calculation Type:

Welding Setup

in
mph

Welding Process

๐Ÿ“š Learn the Theory

Detailed coverage of hot tap fitting design, flow rate effects, tapping procedures, and safety protocols.

Read Engineering Guide โ†’

Formula (Hot Tap Flow)

Qbranch = C ร— Abranch ร— โˆš(2gฮ”P/ฯ)
Qbranch = Branch Flow Rate
C = Discharge Coefficient
Abranch = Branch Area
ฮ”P = Pressure Differential
ฯ = Fluid Density

Standards & References

  • API RP 2201
    Safe Hot Tapping Practices in Petroleum & Petrochemical Industries
  • AWS D10.11
    Guide for Root Pass Welding and Gas Purging
  • ASME B31.4 / B31.8
    Pipeline Transportation Systems for Liquids and Gas
  • NACE SP0169
    External Corrosion Control on Underground Piping
  • AWWA C214
    Tape Coating Systems for Steel Pipe

Engineering Notes

  • Welding Purge: Target <0.5% Oโ‚‚ for stainless, <1.0% for carbon steel root passes. Use Oโ‚‚ analyzer to verify.
  • Tape Coating: NACE requires minimum 50% overlap. Total thickness should be 40-80 mils for buried pipe.
  • Hot Tap Flow: API 2201 limits velocity to <60 ft/s gas, <10 ft/s liquid during tapping to prevent cutter damage.
  • Beta Ratio: Branch/main diameter >0.5 requires reinforcement per ASME B31.8.

Related Calculators

๐Ÿ”ฅ

Hot Taps & Welding

Max pressure, burn-through risk, welding recs
๐Ÿ“

Pipe Flow Area

Calculate internal flow area
๐Ÿ’จ

Gas Velocity

Determine gas flow velocity
๐Ÿ“ˆ

Pressure Ratings

Determine pipe pressure ratings